SMY Stealth Heavy Duty Adjustable Rear Lateral Links / Toe Arms Subaru 2022-2026 WRX

Take absolute control over your rear toe alignment, eliminate high-speed instability, and protect your tires from devastating wear. When you drop your Subaru WRX, STI, BRZ, or CrossTrek on Coilovers or lowering springs, your rear suspension geometry naturally shifts. This throw-off creates aggressive, unmanageable toe angles that the factory eccentric bolts simply cannot correct. The result? A rear end that feels floaty or unpredictable at high speeds, severe "crab-walking" under acceleration, and tires that bald on the edges in a matter of months. The SMY Performance Stealth Heavy-Duty Adjustable Rear Toe Arms are the definitive, standalone solution. Engineered to provide maximum adjustment freedom, these toe links allow you to dial in your suspension with laser precision—restoring factory tracking for a reliable daily driver or tuning in aggressive alignment specs for a locked-in track or drift weapon.

Features:
- Anti-Snap Architecture (Engineered for Brutal Strength): The aftermarket is flooded with cheap, unstructured toe arms that utilize thin, hollow rods or brittle metal alloys. Under the intense lateral forces of high-speed cornering, hard launches, or drifting, those inferior links flex wildly and are notoriously prone to buckling or snapping mid-corner. SMY toe arms feature an over-engineered, solid heavy-duty steel profile designed specifically to eliminate deflection entirely. They are structurally reinforced to take a beating, guaranteeing they will never bend or break under load.
- Precision Turnbuckle Adjustability (On-Car Adjustments): Forget the massive headache of unbolting your suspension every time you need an alignment adjustment. Equipped with high-precision turnbuckle adjusters, these arms allow your alignment technician to easily fine-tune your settings on the fly while the car is fully weighted on the rack.
- Massive Alignment Correction Range: Offering up to +/- 12mm (+/- 3 Degrees) of toe adjustment, this kit provides the exact geometry correction needed to completely square up your rear end, regardless of how low or aggressive your vehicle's ride height is.
- Extra-Thick High-Density Polyurethane Bushings: Many track-focused toe links use open, noisy spherical heim joints that let road grit inside, leading to metal-on-metal rattling and premature failure. SMY utilizes extra-thick, performance-grade polyurethane bushings. They deliver instantaneous, zero-slop handling feedback while preserving daily driving comfort by isolating harsh road vibrations.
- Premium Stainless Steel Anti-Corrosion Hardware: Regular steel adjustment threads quickly rust, seize, and strip out when exposed to rain, mud, and winter road salt. Our kit includes high-tensile, marine-grade stainless steel hardware to ensure your adjustment threads spin smoothly for the lifetime of the vehicle.
- Stealth OEM+ Aesthetics: Finished in a rugged, road-resistant satin black powder coat, these arms blend perfectly into your underbody, hiding your upgraded hardware from plain sight while offering maximum defense against stone chips and debris.
- Replaces OEM Subaru Part =20250FL010 / 20250FL020
- Overall Length and Full Closed Position (Center Hole to Center of Bolt) = 11 inches (see gallery images for specifics)

Includes:
- 2 x Toe Arms (sold as a SET)
- Hardware

Installation:
- Subframe Mounting Side Bolt: 74 Foot-lbs.
- THub Assembly Mounting Side Bolt: 44 ft-lbs.
- Note: Always remember to grease the  bushings thoroughly during assembly using a quality synthetic grease. To prevent premature bushing wear and ensure accurate tracking geometry, always torque down all suspension fasteners while the vehicle is resting under its full weight on the ground (loaded), never while suspended in the air.
- A professional four-wheel alignment is required immediately following installation.

Applications:
2022-2026 Subaru WRX
2016-2026 Subaru CrossTrek
2019-2025 Subaru Forester
2017-2026 Subaru Impreza
2020-2025 Subaru Legacy
2020-2025 Subaru Outback