SMY Stealth 26mm Solid Heavy Duty Front Sway Bar 2 Point Adjustable Subaru 2022-2026 WRX

Tame the body roll and unlock the true handling potential of your VB WRX. While the global platform chassis is a massive structural upgrade over previous generations, the factory 23.5mm front sway bar leaves a lot to be desired. Dive hard into an apex or transition quickly through an S-curve, and the front end responds with noticeable body roll and mid-corner hesitation. The SMY Performance Stealth 26mm Solid Front Sway Bar eliminates that front-end slop. By drastically increasing torsional rigidity, it keeps your front tires flat against the tarmac, delivering immediate turn-in response and sharp, slot-car tracking without sacrificing the daily ride quality you depend on.

Features:
- Massive 38% to 40.5% Stiffness Upgrade: Standard hollow bars lack the brute structural resistance of solid steel. The SMY Stealth bar is mandrel-bent from solid, high-tensile steel, providing a 38% stiffness increase over OEM on the furthest setting, and scaling up to 40.5% stiffer on the closest setting.
- 2-Point Track & Street Adjustability: Fine-tune your WRX’s handling dynamics in minutes. Dial it back for a compliant, razor-sharp street setup, or tighten it up to eliminate understeer completely for weekend track days or canyon runs.
- Zero-Maintenance Grease-Port Brackets: One of the biggest complaints about aftermarket sway bars is the eventual, annoying polyurethane squeak. SMY solves this completely by including heavy-duty bushing brackets equipped with built-in grease Zerk ports and protective caps. You can easily service your bushings with a grease gun without ever having to unbolt the bar from the car.
- OEM+ Stealth Aesthetics: Part of SMY’s signature "Stealth Line," this bar features a durable, satin-black powder coating. It resists road debris, salt, and corrosion while blending perfectly into the underbody for a clean, factory-plus look.
- Perfect Fit for Stock or Lifted Setups: Engineered around the VB’s exact suspension geometry. Whether your WRX is slammed on Coilovers, sitting on stock springs, or lifted for a rugged rally-cross build, this bar retains flawless clearance.
- Color = Power coated Stealth Black

Specs & Performance Metrics:

Includes:
- (1) SMY Stealth 26mm Solid Front Sway Bar
- (2) Premium Rubber Bushings
- (2) Upgraded Heavy-Duty Brackets with Integrated Grease Zerk Ports
- All Necessary Installation Hardware
Driver's Note: To get the absolute most out of this 26mm upgrade, we highly recommend pairing this bar with a set of heavy-duty adjustable front Endlinks. Keeping the bar perfectly preloaded ensures instantaneous suspension articulation the second you turn the wheel.

Installation:
- Endlink bolts = 44 Foot-lbs.
- Sway Bar Mounts = 33 Foot-lbs.
- After Fully Installed, you Must Add Grease.  Grease must be added after every track event or during maintenance approximately every other season.  The best Grease we have found is the REDLINE CV2 Red Grease.
- TO PROPERLY TORQUE DOWN SUSPENSION THE PARTS MUST BE UNDER FULL LOAD, NOT SUSPENDED IN THE AIR

Application:
2022-2026 Subaru WRX