PRL Motorsports 2018+ Honda Accord 2.0T Front Pipe Gasket and Hardware Kit

Description

Replacement hardware kit for our 2018+ Honda Accord 2.0L Turbo and 2019+ Acura RDX 2.0L Turbo Front Pipe. May fit other manufacturers' 3 inch downpipes
Technical Notes:
KLINGER Graphite Laminate SLS consists of expanded layers of graphite, which are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401.

The adhesive layer is applied via a precisely controlled process, which makes it possible to keep the amount of adhesive below 1 Percent of the amount of graphite in order to ensure uniform distribution of the adhesive.

Especially suitable for weak flanges at high temperatures up to 450 Degree C. The gasket material consists of expanded layers of graphite, which are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401.

The adhesive layer is applied via a precisely controlled process, which makes it possible to keep the amount of adhesive below 1 Percent of the amount of graphite in order to ensure uniform distribution of the adhesive.

• Excellent chemical resistance
• Excellent high temperature resistance
• Provides excellent adaptability to any sealing surface
• Seals irregular flanges
• Conforms easily
• Stable physical properties over the whole temperature range

Each gasket is stamped from KLINGER Graphite Laminate SLS, which offers excellent sealing properties for flanges throughout a wide variety of temperatures.
Kit Includes:

• 1 Downpipe Gasket
• 1 Front Pipe Gasket
• 3 M10 x 1.25mm x 35mm Flange Bolt
• 3 M10 x 1.25mm Flange Nut

Additional Description

• CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov