cp-e
cp-e™ ΔCore™ Mazda Mazdaspeed 3 Gen 1 / Mazdaspeed6 Top Mount Intercooler
cp-e™ ΔCore™ Mazda Mazdaspeed 3 Gen 1 / Mazdaspeed6 Top Mount Intercooler
We try our best to have as many of our products readily available, if you want to double check stock or lead times, please give us a call at 801-769-6929 or reach out to one of our sales reps!
Couldn't load pickup availability
In order to create the most efficient and highly consistent intercooler, we use a bar and plate design. This allows for a larger core that can combat heat soak and dissipate heat better than a tube and fin design.
The intercooler features a perfect seal between the ambient and charge sides thanks to bars running the entire length of the intercooler. This highly concentrated design is exactly what you need to put an end to heat soak.
To ensure a perfect OEM-like fitment, we’ve laser cut all of our brackets. This crucial step removes human error from the equation and guarantees that every intercooler is delivered exactly as it was designed in our CAD software.
Welds can look nice, but every weld is a potential area for failure. To minimize welds and increase the reliability and structure of our intercoolers, we cast all of our end tanks. In addition to adding durability, this step allows us to bench test and perfect the flow of air and air distribution across the intercooler core.
Not California emissions compliant | No implied CARB certification | Off-road use only
CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Customer Reviews
I was excited to buy American Made CPE. It was highly reviewed.
With that said, I was very upset I spent $500 to get this shittily made item. Whoever made my TMIC was a shitty machinist. I hope he gets fired.
The unit I received had very poor taps for the screws. I had to rethread all the holes on the bottom of the intercooler especially the ones that attach to the bypass valve. Since I was tracking the car, I needed to just fix the issue myself and rethread the holes.
For real though, screw that machinist ,at CPE, his work is garbage.
So I had this same TMIC on my Gen1 and it kept my AITs between 4-5 degrees above the ambient temperature. I had read some reviews on the Gen 2 version not being the best. This fits a Gen 2 with the larger Corksport hood scoop.
Customer Reviews
I was excited to buy American Made CPE. It was highly reviewed.
With that said, I was very upset I spent $500 to get this shittily made item. Whoever made my TMIC was a shitty machinist. I hope he gets fired.
The unit I received had very poor taps for the screws. I had to rethread all the holes on the bottom of the intercooler especially the ones that attach to the bypass valve. Since I was tracking the car, I needed to just fix the issue myself and rethread the holes.
For real though, screw that machinist ,at CPE, his work is garbage.
So I had this same TMIC on my Gen1 and it kept my AITs between 4-5 degrees above the ambient temperature. I had read some reviews on the Gen 2 version not being the best. This fits a Gen 2 with the larger Corksport hood scoop.