Stillen 350Z Z33 Supercharger Tuned System Polished For 07-09 Nissan 350Z Z33

Description

STILLEN VQ35HR Supercharger Kit for the 2007-09 Nissan 350Z - Polished Looking to extract more horsepower and torque from your 350Z? How does around 450HP at the crank grab you? ?’?¦

Add a dose of torque, better-than-stock heat management and airflow, 50 state emissions compliance and near stock fuel economy at low RPM. Now you've got the formula for superchargers done the STILLEN way. Continuing with the success of the STILLEN supercharger system for the Nissan VQ35DE (350Z), STILLEN is proud to offer the VQ35HR dual throttle body 350Z supercharger kit. The VQ35HR Supercharger shares most of the same components found in the VQ37 kit, and designed as a direct bolt-on to the 3.5L VQ35HR.
We're talking driveable horsepower too, suitable for daily drivers, canyon carvers and track days.

Take an unsuspecting passenger for a low RPM cruise around town in your STILLEN supercharged Nissan 350Z. Keep a light touch on the gas pedal and they might be fooled into thinking there's a bone stock motor under the hood.

They won't suspect a thing....until you hit the town limit sign and crack the throttle wide open.
Scenery gets blurry-in-a-hurry as the centrifugal Vortech blower spins up to hyperspeed with a telltale hiss. The STILLEN designed and built intake manifold sucks in cubic yards of cool air. The remapped ECU fuel management module jacks the boosted fuel pump to inject the precise amount of high octane cocktail into the maelstrom.
Your right foot is orchestrating a symphony of controlled violence that delivers a linear, bottomless powerband. If you can peel your head off the headrest to sneak a glance at your passenger you'll see instant enlightenment and heavy G's at work.

You might think it all sounds like witchcraft. But there are no spells and potions involved in creating this enhanced driving experience. Designing this supercharger system for the 370Z involved precision engineering and innovative problem solving - a STILLEN specialty!

Much of the year-long development and testing process surrounded the ECU fuel management settings. STILLEN engineers remapped the ECU fuel management settings for the supercharger system to manage the improved airflow, operating temps and huge power gains, all while achieving 50 state emissions compliance.

The complete supercharger kit includes larger injectors and a new fuel pump to match the remapped factory ECU.

By redesigning the intake manifold we were able to incorporate the intercooler inside the manifold, thus allowing us to cool the air charge immediately before the air enters the engine. Additionally, the front mounted heat exchanger does not block the airflow supplying cool air to other vital coolers such as the radiator, engine oil cooler, transmission cooler, power steering cooler or the A/C condenser. Because water is 4 times more efficient at dissipating heat than air, we are able to utilize a more compact heat exchanger to cool the water.

The V-3 features a self-contained oiling system and quiet V-belt design, with plenty of additional boost capability for those wanting even more power down the road.

STILLEN took extreme care in designing this system, ensuring that all additional coolers (oil, transmission, power steering, etc) would work with the intercooler system, as the Nissan VQ37 engine is prone to high oil temperatures unless properly cooled.

At all levels of development the system was tested, both for street drivability and reliability under normal traffic and freeway conditions. Stillen drivers flogged the test car at El Toro Air Base, with repeated 140+ mph runs and hard driving on tight courses with excessive revving and redlining. Testing included extensive monitoring of all pertinent air and fluid temperatures.

One of the hallmarks of a STILLEN supercharger is ease of installation. Much of the assembly of the kit is completed here at STILLEN before we pack and ship your supercharger. The main supercharger unit is pre-assembled to the laser-cut billet aluminum mounting brackets. Installation is very straight forward, including detailed step-by-step instructions. Typical install time for a competent shop is 12 hours. ?’?¦

Individual results will vary depending on baseline condition of the stock engine, type of dynamometer used, temperature, elevation, fuel and various other factors. Typical results are around 400WHP at under 500' elevation and below 75 degrees F. Average output ranges from 380WHP to 450WHP depending on level of modification, engine health/age, fuel type used, elevation/sea level and the weather that particular day.

50-state compliance currently for 2007-09 model years. Call us or check individual product pages for model year updates.

Certain conditions apply for warranty eligibility. Consult individual product pages or... CALL NOW, Your STILLEN Speed, Performance and Style Counselor is standing by - dial 866-250-5542 today.

STILLEN is proud to offer our exclusive supercharger kit for the VQ35HR Nissan 350Z. Get yours today!

BENEFITS

• Increase Horsepower & Torque to 450HP (Flywheel) Level - Typically 360WHP (Range 360-410WHP Depending)
• 50 STATE LEGAL
• Air-water intercooler chills air charge at engine entry point
• FITS UNDER STOCK HOOD! No Hood Replacement Required
• Includes Tune File, Tuner Cable & Datalogging Capability
• Front-mounted compact heat exchanger maximizes cool air flow
• Available 3 year/36,000 Powertrain Warranty
• Typically Installs in Approximately 12 Hours for Most Techs

Additional Description

• Limited Lifetime Warranty
• Polished
• CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

About

Since 1986 STILLEN has been recognized as a leader in the high performance automotive industry.  Founded by multi-time World Champion racing driver Steve Millen our company has always been focused on achieving the best performance possible while manufacturing all of our products in America. STILLEN is comprised of a team of enthusiasts with decades of experience tuning, enhancing, and overall improving road cars to be superior in every way.

With in-house manufacturing capabilities for poly-urethane injection manufacturing, metal fabrication and a full CNC machine shop STILLEN is able to produce all products in house to our very strict quality control standards.

Being a manufacturing and engineering company we are able to see the quality of the products made by our partner vendors. We select every partner vendor based on many factors but none more important than the quality of their products and Customer Service.

These two factors are the most important for STILLEN when it comes to offering our vendor partners products to our valued customers. Because we manufacture such a wide range of products we have the experience required to know what is happening with another manufacturer's products and to know whether or not it is a product we can believe in.

With all of the manufacturers we offer STILLEN works extremely hard to develop and maintain excellent relationships with these manufacturers to ensure our customers have the best experience possible.

Whether you are purchasing a STILLEN manufactured product or a part offered by one of our dozens of vendor partners we can guarantee that STILLEN is able to provide the best service possible from fast shipping, to any product support that might arise.

Steve Millen has won championships around the world in many different disciplines of auto racing. From rally cars, to single seaters, and offroad trucks to the highest level of sports car racing (IMSA) Steve has won championships in every category and still holds records for most wins and most pole positions.

He is also the only driver in history to win the 24 hours of Daytona, 12 hours of Sebring and 24 hours of Le Mans in the same year. This level of skill and racing prowess drives our entire team every day to be the best in the business.