Air Lift Performance Evo X Kit

The latest and last generation of the Mitsubishi Evolution still boasts eyeball flattening power, but has grown up a bit when it comes to creature comforts and overall styling compared to earlier versions. A refined cockpit, all wheel drive, and gobs of turbo fed power, where do I sign?

However, just because you have all wheel drive does not mean you need to have an all wheel drive stance. Coil-overs and lowering springs are tempting options, but harsh ride and scraping get old real quick. What if there were a suspension option that would let you go super low, give you a great ride, and superior handling? The Air Lift Performance engineers have developed such a suspension set up. Better yet, it is all adjustable with the touch of a button and twist of a knob!

Starting with the front suspension, we replace the front strut with our own threaded body, monotube, 30-way adjustable strut, which is topped off with a smooth-riding, double-bellows air spring. No need to purchase a set of camber plates to help with handling duties; we include a killer set of T-6061 red anodized plates coupled with high-quality spherical bearings for precise steering and quick reflexes. This hardware all adds up to an astounding 4″ drop from factory ride height.

In the rear, we utilize a progressive-rate, sleeve-style air spring mounted to a monotube, 30-way damping adjustable shock to match the front. Also, just like the front, we use T-6061 aluminum upper mounts, this time with rubber isolators. When it is all said and done, you end up with a 4.6″ drop from that 4×4 stock height.

It’s not all about fancy parts and a show-stopping stance, though. This suspension was designed for maximum handling and proven on the racetrack. Not only will the air springs give you a smooth, progressive spring rate under hard driving, but the 30 levels of damping adjustment really allow you to fine-tune the ride, and give you the handling you are looking for. Go from a smooth, comfortable ride to race-car-stiff handling with the twist of a knob. What does this mean, exactly? It means you can have a comfortable drive to the track, change a couple of settings, and carve corners with the best of them. It also means that steep driveways and speed bumps will no longer make you cringe. With the push of a button, you can raise the car to factory height and clear pretty much any obstacle that comes along.

Detailed instructions will help you get your Evo X slammed within a few short hours. If you have the ability to wire a stereo and swap out suspension parts, you should have no problem installing this air suspension. If you do run into a snag with installation, the Air Lift Performance tech support team is top-notch and can walk you through any questions you may have.

In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to 1 million cycles (equivalent to approximately 100,000 miles) on our hydraulic test rig at temperatures from -30 deg F to 150 deg F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!

Isn’t it time you stopped compromising?  Get yourself the most versatile suspension made for the Evo and start enjoying your #lifeonair.

AutoPilot V2 Features:

• (8) User Definable pressure-based presets
• Manual Control Mode for each bag (individually or combined)
• Rise-on-Start
• Automatic System Calibration
• Compressor Wear-Down Testing
• Compressor Timer
• User Definable Compressor ON/OFF Pressure Setting
• User Definable Controller Screen Backlight Color and Brightness
• User Definable Unit of Measurement (PSI/BAR)

AutoPilot V2 Management Includes:

• Air Lift AutoPilot V2 System
• Combined ECU/Manifold Unit
• ECU/Manifold Mounting Hardware
• AutoPilot V2 Controller and Harness
• Pre-assembled ECu/Manifold Wiring Harness with built-in Compressor Relay
• Auto drain water trap
• (2) In-line Fuse Holders (with fuses)
• Wiring Terminals for hassle-free Installation
• Aluminum Air Tank of your choice
• Free Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
• Compressor(s) of your choice
• 40amp Relay(s) for your compressor(s)**
• Relay Wiring Kit(s)**
• Inflation Valve
• Air Tank Drain Kit
• Air Line Cutter Tool
• (1) 60ft Bundle of DOT Approved Air Line
• 100% Free Technical Support - The Industry's Best!
** Single Compressor kits will not include an additional relay, as a relay is built-into the AutoPilot V2 Wiring Harness

Air Lift 3P Features:

• (5) User-definable pressure presets (can be upgraded to height)
• Manual mode for individual air spring control
• Digital controller with color screen
• Rotatable keypad that allows for horizontal mounting
• Mobile app (no additional hardware required)
• System updates through mobile app
• Combined ECU and manifold
• Rise on start
• Limited lifetime warranty

Air Lift Performance 3P Management Includes:

• Air Lift Performance 3P System
• Combined ECU/Manifold Unit
• ECU/Manifold Mounting Hardware
• Air Lift Performance 3P/3P Controller and Harness
• Pre-assembled ECU/Manifold Wiring Harness with built-in Compressor Relay
• Auto drain water trap
• In-line Fuse Holders (with fuses)
• Wiring Terminals for hassle-free Installation
• Aluminum Air Tank of your choice
• Free Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
• Compressor(s) of your choice
• 40amp Relay(s) for your compressor(s)**
• Relay Wiring Kit(s)**
• Air Tank Drain Kit
• Air Line Cutter Tool
• (1) 60ft Bundle of DOT Approved Air Line
• 100% Free Technical Support - The Industry's Best!
** Single Compressor kits will not include an additional relay, as a relay is built into the Air Lift Performance 3P Wiring Harness

3H Features:

• (5) height and pressure presets
• Automatic leveling (with height sensors installed)
• Manual mode for individual air spring control
• Digital controller with color screen
• Rotatable keypad that allows for horizontal mounting
• Mobile app (no additional hardware required)
• System updates through mobile app
• Combined ECU and manifold
• Rise on start
• Limited lifetime warranty

• Air Lift Performance 3H Management Includes:
  • Air Lift Performance 3H System
  • Combined ECU/Manifold Unit
  • (4) Air Lift Performance Height Sensors and Mounting Hardware
  • ECU/Manifold Mounting Hardware
  • Air Lift Performance 3H/3P Controller and Harness
  • Pre-assembled ECU/Manifold Wiring Harness with built-in Compressor Relay
  • Auto drain water trap
  • In-line Fuse Holders (with fuses)
  • Wiring Terminals for hassle-free Installation
  • Aluminum Air Tank of your choice
  • Free Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
  • Compressor(s) of your choice
  • 40amp Relay(s) for your compressor(s)**
  • Relay Wiring Kit(s)**
  • Air Tank Drain Kit
  • Air Line Cutter Tool
  • (1) 60ft Bundle of DOT Approved Air Line
  • 100% Free Technical Support - The Industry's Best!
  ** Single Compressor kits will not include an additional relay, as a relay is built into the Air Lift Performance 3H Wiring Harness