{"title":"Cold Start 10% OFF","description":"","products":[{"product_id":"spc-camber-arms-rear-pair-mazdaspeed-3-2007-2013-ford-focus-st-2013-2018-focus-rs-2016-2018","title":"SPC Camber Arms REAR (PAIR) Mazdaspeed 3 2007-2013 | Ford Focus ST 2013-2018 | Focus RS 2016-2018","description":"\u003cdiv class=\"ProductDescriptionContainer\"\u003e\n\u003cp\u003e\u003cspan\u003eSPC Performance specializes in alignment and suspension tuning products made to take on the abuse at the track and the reliability of any street or race application.  SPC has been designing and producing high quality suspension component since 1972. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductDescriptionContainer\"\u003e\n\u003cp\u003e\u003cspan\u003eLowering your vehicle changes the characteristics of the suspension and requires a new alignment.  SPC rear camber arms will allow you to align the rear camber of the vehicle further than what the factory intended, allowing you to properly align the car after putting a performance suspension on the car.  This is a must when lowering your vehicle on lowering springs or coilovers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan\u003eThese high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms. Complete with OE style bushings installed for a factory type ride.\u003cbr\u003e\u003cbr\u003eRear Camber Adjustment Rear Camber -1.5 degree to +5.0 degree\u003c\/span\u003e\n\u003c\/div\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":11187681329188,"sku":"67420X2","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/products\/SPC.jpg?v=1571721401"},{"product_id":"mazdaspeed-3-6-gravedigger-filtered-oil-feed-line","title":"Mazdaspeed 3\/6 Gravedigger Filtered Oil Feed Line","description":"\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003eProtect your turbo and maximize your Mazdaspeed’s performance with the Gravedigger Filtered Oil Feed Line made exclusively for the Mazdaspeed 3 and Mazdaspeed 6.\u003c\/div\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003eTurbo failure from oil contamination is one of the most common (and expensive) issues for Mazdaspeed owners. The Gravedigger Filtered Oil Feed Line solves this problem by incorporating a high-flow, directional 40-micron filter to catch debris before it can damage your turbocharger.\u003cbr\u003e\u003cbr\u003eBuilt for durability and performance, this direct-fit kit is a must-have upgrade for any Mazdaspeed build, whether you’re daily driving or pushing big power.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fit for Mazdaspeed 3 \u0026amp; Mazdaspeed 6:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo cutting or custom fabrication required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Inline Filter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTraps harmful particles and debris before they reach your turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality AN Fittings \u0026amp; -4 AN Braided Line:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned for maximum durability, heat resistance and leak-free operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Turbo Longevity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProtects your investment and reduces the risk of costly repairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Kit:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes everything needed for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003e\n\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003cbr\u003eStock oil feed lines are prone to clogging and can let debris destroy your turbo. The Gravedigger Filtered Oil Feed Line is the proven solution trusted by Mazdaspeed enthusiasts and builders throughout the industry.\u003c\/div\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e2007–2013 Mazdaspeed 3\u003c\/li\u003e\n\u003cli\u003e2006–2007 Mazdaspeed 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003eUpgrade your oil feed system today and drive with confidence, your turbo wallet thank you.\u003c\/div\u003e\n\u003cpre\u003e\u003cspan\u003eInstallation Difficulty: Intermediate \u003c\/span\u003e\u003c\/pre\u003e\n\u003cpre\u003e\u003cspan\u003eTime Required: 1-2 hours \u003c\/span\u003e\u003c\/pre\u003e\n\u003cpre\u003e\u003cspan\u003eTools Needed: 14mm Wrench, 14 MM Socket, 11\/16 Wrench (For Servicing)\u003c\/span\u003e\u003c\/pre\u003e\n\u003cpre\u003e\u003cspan\u003eDrain oil before installation, replace oil and filter after completion\u003c\/span\u003e\u003c\/pre\u003e\n\u003cp\u003e\u003cspan\u003eRecommended to replace or clean oil feed filter every 3,000-6,000 miles\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eThe User accepting this disclaimer acknowledges and hereby indemnifies and saves harmless Late Model Restoration, its officers, employees, agents, distributors and dealers for any damages, penalties, fines, expenses or other costs which may arise from the use of this Product and without limiting the generality of the foregoing specifically acknowledges the following:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse of this Product for purposes other than solely for competition may be a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that this Product shall only be used in sanctioned closed-circuit events.\u003c\/li\u003e\n\u003cli\u003eThat use of this Product may violate warranties from the manufacturer of the Vehicle or from others.\u003c\/li\u003e\n\u003cli\u003eThat use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death.\u003c\/li\u003e\n\u003cli\u003eThat the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0055\/2098\/2086\/files\/Prop65.jpg?12986702610529703184\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Gravedigger by Graveyard","offers":[{"title":"Mazdaspeed 3 \/ BNR\/OEM \/ No Thank you","offer_id":41255681884358,"sku":"BFLMS36-OEM","price":134.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ BNR\/OEM \/ Yes - STOCK\/BNR S1-4\/CST","offer_id":45232815538374,"sku":null,"price":269.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ Garrett GTX\/CST6-JB (7\/16\"-24) \/ No Thank you","offer_id":41255681917126,"sku":"BFLMS36-GRT","price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ Garrett GTX\/CST6-JB (7\/16\"-24) \/ Yes - ATP IWG","offer_id":45232815603910,"sku":null,"price":289.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ CST4-JB\/CTS5-JB (M12x1.25) \/ No Thank you","offer_id":41255681949894,"sku":"BFLMS36-CST","price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ CST4-JB\/CTS5-JB (M12x1.25) \/ Yes - STOCK\/BNR S1-4\/CST","offer_id":45232815636678,"sku":null,"price":279.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ Precision (1\/8\" NPT) \/ No Thank you","offer_id":42694479741126,"sku":"BFLMS36-PTE","price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ Precision (1\/8\" NPT) \/ Yes - PTE","offer_id":45232815669446,"sku":null,"price":289.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ BNR\/OEM \/ No Thank you","offer_id":45232815702214,"sku":null,"price":134.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ BNR\/OEM \/ Yes - STOCK\/BNR S1-4\/CST","offer_id":45232815734982,"sku":null,"price":269.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ Garrett GTX\/CST6-JB (7\/16\"-24) \/ No Thank you","offer_id":45232815800518,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ Garrett GTX\/CST6-JB (7\/16\"-24) \/ Yes - ATP IWG","offer_id":45232815833286,"sku":null,"price":289.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ CST4-JB\/CTS5-JB (M12x1.25) \/ No Thank you","offer_id":45232815866054,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ CST4-JB\/CTS5-JB (M12x1.25) \/ Yes - STOCK\/BNR S1-4\/CST","offer_id":45232815898822,"sku":null,"price":279.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ Precision (1\/8\" NPT) \/ No Thank you","offer_id":45232815931590,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ Precision (1\/8\" NPT) \/ Yes - PTE","offer_id":45232815964358,"sku":null,"price":289.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ BNR S5 \/ No Thank you","offer_id":45657685295302,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 3 \/ BNR S5 \/ Yes - BNR S5","offer_id":45657685328070,"sku":null,"price":289.0,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ BNR S5 \/ No Thank you","offer_id":45657685360838,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"Mazdaspeed 6 \/ BNR S5 \/ Yes - BNR S5","offer_id":45657685393606,"sku":null,"price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/GP_FEED_LINE-5.jpg?v=1762286777"},{"product_id":"invidia-2015-subaru-wrx-sti-gemini-r400-single-layer-quad-titanium-tip-cat-back-exhaust","title":"Invidia 2015+ Subaru WRX \/ STI Gemini\/R400 Single Layer Quad Titanium Tip Cat-Back Exhaust","description":"Invidia 2015+ Subaru WRX \/ STI Gemini\/R400 Single Layer Quad Titanium Tip Cat-Back Exhaust\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Invidia","offers":[{"title":"Default Title","offer_id":42387872219334,"sku":"INVHS15STIGM4ST","price":1848.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/1d155cb6-5cdf-4e5c-9c64-640276712d1d-800_d788d25a-768d-4b6f-b847-873ed9986ef9.jpg?v=1761841271"},{"product_id":"gravedigger-focus-st-mazdaspeed-ethanol-content-sensor-kit","title":"Gravedigger Focus ST \u0026 Mazdaspeed Ethanol Content Sensor Kit","description":"\u003ch2 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGravedigger Focus ST \u0026amp; Mazdaspeed Ethanol Content Sensor Kit by Graveyard Performance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eWhen tuning your Focus ST \/ Mazdaspeed on Ethanol, it is crucial to have the correct Ethanol content in your tank to avoid potential lean conditions that could cause damage to your motor. Skip all the guess work and tedious testing every time you fill up by using this ethanol gauge made by Innovate paired with the correct fittings to allow this sensor to easily adapt into the factory fuel line system on your Mazdaspeed 3, Mazdaspeed 6 or Focus ST.\u003c\/p\u003e\n\u003cp\u003eThis kit is also useable with most platforms using 5\/16th fuel line connections!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWhat's Included?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInnovate MTX-D Ethanol Contract Gauge Kit\u003cbr\u003eInnovate Ethanol Content Analyzer\u003cbr\u003eGravedigger 360 Degree Push Lock Fuel Line Fitting Kit\u003cbr\u003eFuse Tap w\/ Fuses\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSimple installation for Focus ST:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSpecialty tools needed for install:\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e5\/16th Fuel Line Disconnect Tool\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect Battery\u003c\/li\u003e\n\u003cli\u003eRemove Battery and Battery Box\u003c\/li\u003e\n\u003cli\u003eRemove Cold Air Intake for more clearance\u003c\/li\u003e\n\u003cli\u003eLet car sit for an hour for fuel pressure to evacuate, or crack the fitting on the feed line going to the HPFP to release pressure.\u003c\/li\u003e\n\u003cli\u003eUse a fuel line disconnect to separate the fuel lines that run from the fire wall to the HPFP feed line.\u003c\/li\u003e\n\u003cli\u003eInstall the ethanol sensor using the quick disconnect swivel fittings.\u003c\/li\u003e\n\u003cli\u003eRemove glove box and feed the gauge harness through the firewall grommet behind the glovebox into the engine bay.\u003c\/li\u003e\n\u003cli\u003eRun harness power to Fuse F87 under the glovebox.\u003c\/li\u003e\n\u003cli\u003eRun harness ground to bolt on chassis under the glovebox.\u003c\/li\u003e\n\u003cli\u003ePlug harness into the ethanol content sensor\u003c\/li\u003e\n\u003cli\u003eInstall the gauge in the glovebox and connect the main harness to the gauge.\u003c\/li\u003e\n\u003cli\u003eRe-install battery, battery box, glove box, intake.\u003cbr\u003e\u003cbr\u003e\n\u003cpre\u003e\u003cstrong\u003e\u003ccode\u003e🔧🔧 Installation Difficulty: Intermediate\n⏱️ Time Required: 1.5 hours\n🔧 Tools Needed: Basic tools, wire strippers, electrical connectors\n⚠️ Wiring Required: Some electrical work needed\n💡 Follow wiring diagrams carefully for best results\u003c\/code\u003e\u003c\/strong\u003e\u003c\/pre\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Gravedigger by Graveyard","offers":[{"title":"Default Title","offer_id":44050284576966,"sku":"GYPECA (3904+GP-E360+FT)","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/F989703A-EB30-4F22-8940-80FE4450684B.jpg?v=1724795231"},{"product_id":"mhd-super-tuning-license-for-b58-supra-m340i-340i-440i-and-more","title":"MHD Super Tuning License for B58 Supra, M340i, 340i, 440i, and more","description":"\u003cp\u003eThe MHD Flasher F+G Series is a complete flash tuning app for your BMW \u0026amp; Toyota A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance, maximum safety, and unrivaled drivability.\u003c\/p\u003e\n\u003cp\u003eYou can install MHD right at home and tune your B58 immediately! Simply download the MHD Flasher F+G Series app that connects via our MHD Wireless Adapter to your Apple iOS or Android device and your vehicle’s OBD-II port, start the app, and within 5 minutes the initial installation is complete. Further map changes are much faster – only 30 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.\u003c\/p\u003e\n\u003cp\u003eThe Super Licence provides all the available MHD functionalities in one package (all single licenses are included, Flasher, Monitor and all 3 Map packs!):\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlasher License: \u003c\/strong\u003e\u003cbr\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003eThe Flasher License unlocks the ability to flash with MHD (MHD OTS maps, JB4 backend maps and custom maps) \u003cbr\u003e\u003cbr\u003e\u003cem\u003eFeatures:\u003c\/em\u003e \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e1. Quickest flash times on market with our MHD WIFI Adapter (2- 3.5 min initial, 10-19 sec map switch) \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e2. Stage 0 stock power (all flash options can be added)\u003cbr\u003e3. Reading \/ Deleting Engines Codes + Adaptions Reset\u003cbr\u003e\u003cbr\u003e\u003cem\u003eAvailable flash options: \u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Exhaust burble (Duration base and sport mode, aggressiveness, min \/ max. speed, min \/ max. rpm) \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Startup roar\u003cbr\u003e- Cold start noise reduction (per map Slot on B58GEN2!)  \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Exhaust flap always open in sport mode \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Top speed limiter (Vmax) removal \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Sport \/ Racing Cooling mode for coolant\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Sport Cooling Mode for intercooler\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Support for all upgraded HPFPs \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- OPF \/ GPF delete \/ Cat delete\u003cbr\u003e- And many more... \u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMHD+ *\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe MHD+ Feature unlocks our special custom code. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"o9v6fnle cxmmr5t8 oygrvhab hcukyx3x c1et5uql ii04i59q\" data-mce-fragment=\"1\"\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e1. On the Fly Map Switching:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou can select 4 slots for the same stage to adjust fuel quality on the fly (pump gas and fixed ethanol like E30 map) as well as a power level in percent per map slot. If the flex fuel option is activated (and the required hardware installed) you can still setup 4 pump gas maps in order to quickly setup and change to the pump gas quality that is used at the time when the car is refilled without ethanol.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"o9v6fnle cxmmr5t8 oygrvhab hcukyx3x c1et5uql ii04i59q\" data-mce-fragment=\"1\"\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003eIn addition to the octane selections, you can also use the slider to reduce the power that each map will make. This is very useful if you would like to make your own valet map or lower power map for cruising. The power can be reduced from 100% all the way down to 60% in 5% increments, this means if you put 60% into one map slot than this map only has 60% the power available it would usually make.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e2. Antilag:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAllows you to quickly build a set amount of boost while limiting acceleration, then quickly take off once released. To activate antilag, press and hold the cruise control RES button (or cruise control speed down on B58 GEN2) on your steering wheel and apply heavy throttle. Our antilag strategy will adjust the engine calibration to build boost. Once boost is built, release the button and go! The time required to reach boost target will vary depending on your turbo, but even large upgraded turbos are able to hit high boost within 1-2 seconds!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThere are also various safeties in place such as coolant temp, EGT temp, max duration per use, and cooldown time between uses. These values, as well as the time delay after button press until antilag activates are all set to safe values for those using the OTS antilag flash option. OTS users will have the ability to adjust the antilag boost target (max value depends on engine).\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e3. Switchable Burble per Map Slot:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou can now fully setup the burble for your main Map 1 and then adjust aggressiveness and duration for all other map slots. This means you can now enjoy on the fly burble changes with our MHD+ Map Switch feature!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e4. On The Fly Exhaust Flap Control:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou can now control you exhaust flap how you like, always open, always closed (it will open at high load) or OEM operation via MHD+ Live Menu.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e5. Ethanol Content Quick View:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou can now see the Ethanol content via MHD+ Live Menu if a compatible Ethanol Content Analyzer is installed. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e6. Full and native integration with the Motiv ReFlex controller:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWe have 2-way CANBUS integration to allow advanced capabilities such as the DME limp when there is a PI injector error and DME control of external wastegates. B58 GEN2 has \u003cstrong\u003eMHD+ advanced ReFlex integration\u003c\/strong\u003e, designed to give full control over supplemental port injection, and all of its auxiliary outputs (ex. wgdc, extra fuel pumps, nitrous, etc). This means you only need to flash the ReFlex firmware one time to the latest MHD+ supporting firmware, and from there you can make all the tuning changes you’d ever need right in the DME (for custom tunes)\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e7. Overrun Brap Noise:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou can now enjoy the special \"brap\" noise M-cars make when letting of the throttle after accelerating.\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e8. No Lift Shift:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eShift without releasing the throttle on 6MT cars to get the quickest shifts done (GEN2 only ATM). \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e9. Custom TCU Limiter Removal (GEN2 only ATM):\u003c\/span\u003e\u003c\/strong\u003e Remove TCU limiter while still retaining all safeties and OEM Launch Control\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e10. KnockCEL:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor custom tunes (let’s the CEL blink if timing corrections reach a threshold set by the tuner)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e11. MHD Real-Time Tuning (B58GEN2):\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eWe are \u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eproud to present the world’s first real-time (live) tuning for modern BMWs. \u003c\/span\u003eDuring the custom tuning process, it enables editing of all major tables (including mapswitch and flexfuel slots) on the fly with the engine running, in real-time. Live tuning of additional tables including our Advanced ReFlex PI control will quickly follow. \u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\" data-mce-fragment=\"1\"\u003e\n\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor License:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eMonitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout with up to 8 fully adjustable gauges. 50+ engine parameters are available at a glance and are logged in the background! Activate the logging mode to save the data to a standard CSV file for later analysis using the built in log viewer. Additionally, we will happily provide free logs analysis.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThese are some of the available monitors: Boost, Boost Target, Lambda (AFR), Intake Air Temp (IAT), Ignition Timing per Cylinder, Coolant Temperature, Oil Temperature, Oil Pressure, Transmission Temperature, High Pressure Fuel Pump (HPFP), Throttle Position, Wastegate Duty-Cycle (WGDC), RPM, Speed, EGT etc.\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003eAdvanced parameters that are not exposed by BMW are available for fine monitoring and tuning (depending on the DME software version if MHD is not flashed) like Timing Corrections per Cylinder, Boost setpoint, Active torque limiter etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll MHD OTS maps by PureBoost:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWe offer a wide selection of OTS maps for the B58 engine suitable for many different vehicle modifications and octane levels. They have been extensively road and dyno tested, just flash and go!\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1 (up to 420HP\/580NM, up to 440HP on B58TU1) - 91oct\/95ron, 93oct\/98ron, 95oct\/102ron, for stock cars and cars with gasoline particulate filter.\u003c\/li\u003e\n\u003cli\u003eStage 2 (up to 470HP\/630NM, up to 500HP on B58TU1) - 91oct\/95ron, 93oct\/98ron, 95oct\/102ron, for cars equipped with high-flow downpipe and no gasoline particulate filter.\u003c\/li\u003e\n\u003cli\u003eStage 2+HPFP (up to 500HP\/700NM, GEN1 B58 only) - 93oct\/98ron, 95oct\/102ron, for cars equipped with high-flow downpipe, upgrade HPFP and no gasoline particulate filter.\u003c\/li\u003e\n\u003cli\u003eEthanol Mix Maps (up to 520HP \/ 700NM): Stage 1, 2 and 2+ Maps for ethanol blends of 30%-40% and Full E85\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupported Devices:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eApple iOS 10.2 and higher\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAndroid 6 and higher\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupported Adapters \/ Cables (available separately):\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/mhdtuning.com\/pages\/mhd-wireless-adapter\" data-mce-href=\"https:\/\/mhdtuning.com\/pages\/mhd-wireless-adapter\"\u003eMHD WIFI Adapter\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003eMHD Universal only\u003c\/strong\u003e, recommended for iOS \u0026amp; Android)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eENET Cable + Lightning Adapter (iOS only)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupported Cars:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM140i F2x 2012 - 2019\u003c\/li\u003e\n\u003cli\u003eM240i F2x 2016 - 2019\u003c\/li\u003e\n\u003cli\u003eM240i G42 2021 - *\u003c\/li\u003e\n\u003cli\u003e340i F3x 2015 - 2019\u003c\/li\u003e\n\u003cli\u003eM340i G20\/G21 2019 - *\u003c\/li\u003e\n\u003cli\u003eM440i G2x 2020 - *\u003c\/li\u003e\n\u003cli\u003e440i F3x 2016 - 2019\u003c\/li\u003e\n\u003cli\u003e540i G3x 2017 - *\u003c\/li\u003e\n\u003cli\u003e640i GT G32 2017 - *\u003c\/li\u003e\n\u003cli\u003e740i G1x F0x 2015 - *\u003c\/li\u003e\n\u003cli\u003e840i G1x 2019 - *\u003c\/li\u003e\n\u003cli\u003eX3 M40i G01 2017 - *\u003c\/li\u003e\n\u003cli\u003eX4 M40i G02 2018 - *\u003c\/li\u003e\n\u003cli\u003eX5 40i G05 2018 - *\u003c\/li\u003e\n\u003cli\u003eX6 40i G06 2019 - *\u003c\/li\u003e\n\u003cli\u003eX7 40i G07 2019 - *\u003c\/li\u003e\n\u003cli\u003eZ4 M40i G29 2019 - *\u003c\/li\u003e\n\u003cli\u003eToyota Supra A90 2019 - *\u003c\/li\u003e\n\u003cli\u003eX-Drive is supported on\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eall cars\u003c\/u\u003e.\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003e\u003cspan style=\"color: #ff2a00;\"\u003e***MHD WIFI ADAPTER IS NOT INCLUDED***\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch5\u003e\u003cspan style=\"color: #ff2a00;\"\u003e*Cars with the newest BMW software require a DME bench unlock in order to unlock OBD flashing regardless of production date.  \u003cbr\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cspan style=\"color: #ff2a00;\"\u003e*Cars Produced after 06\/2020 can only be tuned with a special unlock by FEMTO, due to new tuning protection. This means your DME must be sent to FEMTO in Finland. After your DME was unlocked by FEMTO, MHD will automatically detect the FEMTO unlock.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFlashing back to stock will always fully remove the unlock and the DME must be unlocked again for flashing MHD.\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFor off road use only!\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MHD","offers":[{"title":"Yes - Add Wifi Adapter!","offer_id":44151844995270,"sku":"","price":619.0,"currency_code":"USD","in_stock":true},{"title":"No Thanks","offer_id":44151845028038,"sku":"","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/product_super-license_2048x_6bad4125-599a-45f0-a7b7-1cc810a6d801.webp?v=1728058796"},{"product_id":"enkei-nt03-m-18x9-5-5x108-40mm-offset-72-6mm-bore-hyper-silver-wheel","title":"Enkei NT03+M 18x9.5 5x108 40mm Offset 72.6mm Bore Hyper Silver Wheel","description":"Enkei NT03+M 18x9.5 5x108 40mm Offset 72.6mm Bore Hyper Silver Wheel","brand":"Enkei","offers":[{"title":"Default Title","offer_id":44438886809798,"sku":"ENK3658953140HS","price":388.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/0cbf021677f2941518c46b0b9ca612b2.jpg?v=1739309423"},{"product_id":"graveyard-performance-06-07-mazdaspeed-6-gravedigger-crash-bar","title":"Graveyard Performance 06-07 Mazdaspeed 6 Gravedigger Crash Bar","description":"\u003cp\u003e\u003cstrong\u003eThe wait is finally over!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003eAfter years of high demand from the Mazdaspeed 6 community, we're proud to introduce our 100% hand-made, locally built crash bar specifically designed for the 2006-2007 Mazdaspeed 6. This crash bar was engineered to completely remove and replace the OEM crash bar while providing superior clearance for larger front mount intercooler cores.\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Construction:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from high-quality T304 stainless steel with 1 1\/4\" square tubing and 1\/8\" wall thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFeatures 3\/16\" CNC cut mounting brackets for perfect fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Clearance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned to accommodate larger FMIC setups that the factory crash bar cannot support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Replacement:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e100% bolt-in replacement for the OEM crash bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal Manufacturing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand-built in our Utah facility with attention to detail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2006-2007 Mazdaspeed 6\u003c\/li\u003e\n\u003cli\u003eCompatible with TR8 \/ TR1035 \/ TR1045 Intercoolerss\u003c\/li\u003e\n\u003cli\u003eSome modification may be required depending on intercooler size and piping configuration\u003c\/li\u003e\n\u003cli\u003eTR8 Intercoolers will require spacers as they're slightly shorter. Spacers NOT INCLUDED\u003cstrong\u003e (YET! - But see photos spacer\/bolt specs)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Upgrade Your Crash Bar?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003eThe factory Mazdaspeed 6 crash bar severely limits intercooler options and can cause clearance issues with larger cores. Our Gravedigger crash bar eliminates these restrictions while maintaining structural integrity and providing a clean, professional appearance without having to cut your OEM crash bar.\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation recommended\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCrash Bar Comes Disassembled\u003c\/li\u003e\n\u003cli\u003eSome intercooler setups may require additional brackets or custom piping\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGraveyard Performance Mazdaspeed 6 crash bar\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGraveyard Performance sticker and lanyard\u003c\/li\u003e\n\u003cli style=\"font-weight: bold; font-style: italic;\"\u003e\u003cem\u003e\u003cstrong\u003eYoutube Install Instructions COMING SOON\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"mb-1 mt-2 whitespace-pre-line leading-relaxed first:mt-0\" data-sentry-component=\"P\" data-sentry-source-file=\"p.tsx\"\u003e\u003cem\u003eThis product is intended for off-road use ONLY. Graveyard Performance will hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.\u003c\/em\u003e\u003c\/div\u003e","brand":"Gravedigger by Graveyard","offers":[{"title":"Default Title","offer_id":44940615745734,"sku":"GP-MZ6CB-G1","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/CrashBar.png?v=1757093444"},{"product_id":"alpha-injection-clinic-subaru-wrx-sti-fuel-injectors","title":"Alpha Injection Clinic Subaru WRX\/STI Fuel Injectors","description":"\u003cp\u003eFeaturing compatibility with Methanol\/Ethanol\/All Known Hydrocarbon Fuels. Operating pressure up to 9bar~130psi @14v.   \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWRX 02-14, \u003c\/strong\u003e\u003cstrong\u003eLegacy GT \/ Forester XT 07-13. STI 2007+ \u003c\/strong\u003e48x11mm Injector Length. (Drop in fitment)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSTI\u003c\/strong\u003e\u003cstrong\u003e 04-06\u0026gt; \u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003eRequire a Top Feed Conversion. 48x11mm injector length.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFlow Data: \u0026gt;\u003c\/strong\u003e \u003ca title=\"Injector Data\" href=\"https:\/\/alphainjection.com\/pages\/injector-data\"\u003eInjector data\u003c\/a\u003e \u0026lt;\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Alpha Injection Clinic","offers":[{"title":"750cc \/ WRX 02-14 \/ Sti 04+","offer_id":45234297274566,"sku":"75.48.11.16.WRX","price":400.0,"currency_code":"USD","in_stock":true},{"title":"750cc \/ BRZ 2013+ (38x11mm)","offer_id":45234297307334,"sku":"75.38.11.16.WRX","price":400.0,"currency_code":"USD","in_stock":true},{"title":"1000cc \/ WRX 02-14 \/ Sti 04+","offer_id":45234297340102,"sku":"10.48.11.16.WRX","price":440.0,"currency_code":"USD","in_stock":true},{"title":"1000cc \/ BRZ 2013+ (38x11mm)","offer_id":45234297372870,"sku":"10.38.11.16.WRX","price":440.0,"currency_code":"USD","in_stock":true},{"title":"1300cc \/ WRX 02-14 \/ Sti 04+","offer_id":45234297405638,"sku":"13.48.11.16.WRX","price":560.0,"currency_code":"USD","in_stock":true},{"title":"1300cc \/ BRZ 2013+ (38x11mm)","offer_id":45234297438406,"sku":"13.38.11.16.WRX","price":560.0,"currency_code":"USD","in_stock":true},{"title":"1650cc \/ WRX 02-14 \/ Sti 04+","offer_id":45234297471174,"sku":"16.48.11.16.WRX","price":899.0,"currency_code":"USD","in_stock":true},{"title":"1650cc \/ BRZ 2013+ (38x11mm)","offer_id":45234297503942,"sku":"16.38.11.16.WRX","price":899.0,"currency_code":"USD","in_stock":true},{"title":"2200cc \/ WRX 02-14 \/ Sti 04+","offer_id":45234297536710,"sku":"22.48.11.16.WRX","price":790.0,"currency_code":"USD","in_stock":true},{"title":"2200cc \/ BRZ 2013+ (38x11mm)","offer_id":45234297569478,"sku":"22.38.11.16.WRX","price":790.0,"currency_code":"USD","in_stock":true},{"title":"2600cc \/ WRX 02-14 \/ Sti 04+","offer_id":45234297602246,"sku":"26.48.11.16.WRX","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"2600cc \/ BRZ 2013+ (38x11mm)","offer_id":45234297635014,"sku":"26.38.11.16.WRX","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/image1_869e1744-2cae-4dd3-a527-23120e1e2b8f.png?v=1763736019"},{"product_id":"mhd-super-tuning-license-for-bmw-s58","title":"MHD Super Tuning License for S58 BMW M2, M3, M4","description":"\u003cp\u003e\u003cspan\u003eThe MHD Flasher F+G Series is a complete flash tuning app for your BMW \u0026amp; Toyota A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance,maximum safety, and unrivaled drivability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003eYou can install MHD right at home and tune your S58 immediately! Simply download the MHD Flasher F+G Series app that connects via our MHD Wireless Adapter to your Apple iOS or Android device and your vehicle’s OBD-II port, start the app, and within 3.5 minutes the initial installation is complete. Further map changes are much faster – only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Super Licence provides all the available MHD functionalities in one package (\u003cstrong\u003eall single licenses are included, Flasher, Monitor and all 3 Map packs!\u003c\/strong\u003e)\u003c\/span\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlasher License: \u003c\/strong\u003e\u003cbr\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003eThe Flasher License unlocks the ability to flash with MHD (MHD OTS maps, JB4 backend maps and custom maps) \u003cbr\u003e\u003cbr\u003e\u003cem\u003eFeatures:\u003c\/em\u003e \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e1. Quickest flash times on market with our MHD WIFI Adapter (3.5 min initial, 20 sec map switch) \u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e2. Stage 0 stock power (all flash options can be added)\u003cbr\u003e\u003cbr\u003e3. Reading \/ Deleting Engines Codes + Adaptions Reset\u003cbr\u003e\u003cbr\u003e\u003cem\u003eAvailable flash options: \u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Exhaust burble (Duration base and sport mode, aggressiveness, min\/max. speed, min\/max. rpm etc.)\u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Cold start noise reduction \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Exhaust flap always and fully open in sport mode\u003cbr\u003e\u003cspan\u003e- Shift Brap (G8x only)  \u003c\/span\u003e \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- Top speed limiter (Vmax) removal \u003c\/div\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e- and many more...\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMHD+ custom code: \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e1. On the Fly Map Switching:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e You can select 4 slots for the same stage to adjust fuel quality on the fly (pump gas and fixed ethanol like E30 map) as well as a power level in percent per map slot. If the flex fuel option is activated (and the required hardware installed) you can still setup 4 pump gas maps in order to quickly setup and change to the pump gas quality that is used at the time when the car is refilled without ethanol.\u003cbr\u003eIn addition to the octane selections, you can also use the slider to reduce the power that each map will make. This is very useful if you would like to make your own valet map or lower power map for cruising. The power can be reduced from 100% all the way down to 60% in 5% increments, this means if you put 60% into one map slot than this map only has 60% the power available it would usually make.\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2. Antilag:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Allows you to quickly build a set amount of boost while limiting acceleration, then quickly take off once released. To activate antilag, press and hold the cruise control speed down on your steering wheel and apply heavy throttle. Our antilag strategy will adjust the engine calibration to build boost. Once boost is built, release the button and go! The time required to reach boost target will vary depending on your turbo, but even large upgraded turbos are able to hit high boost within 1-2 seconds! \u003c\/span\u003e\u003cspan\u003eThere are also various safeties in place such as coolant temp, EGT temp, max duration per use, and cooldown time between uses. These values, as well as the time delay after button press until antilag activates are all set to safe values for those using the OTS antilag flash option. OTS users will have the ability to adjust the antilag boost target (max value depends on engine).\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e3. Switchable Burble per Map Slot:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e You can now fully setup the burble for your main Map 1 and then adjust aggressiveness and duration for all other map slots. This means you can now enjoy on the fly burble changes with our MHD+ Map Switch feature!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e4. On The Fly Exhaust Flap Control:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e You can now control you exhaust flap how you like, always open, always closed (it will open at high load) or OEM operation via MHD+ Live Menu.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e5. Ethanol Content Quick View:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e You can now see the Ethanol content via MHD+ Live Menu if a compatible Ethanol Content Analyzer is installed.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e6. Advanced Motiv ReFlex Integration:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e We have full 2-way CANBUS integration to allow advanced capabilities such as the DME limp when there is a PI injector error, DME control of external wastegates and full control over supplemental port injection, and all of its auxiliary outputs (ex. wgdc, extra fuel pumps, nitrous, etc). This means you only need to flash the ReFlex firmware one time to the latest MHD+ supporting firmware, and from there you can make all the tuning changes you’d ever need right in the DME (for custom tunes).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e7. Cold Start per Map Slot:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e You can now set cold start noise reduction per map slot.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e8. No Lift Shift:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Shift without releasing the throttle on 6MT cars to get the quickest shifts done.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e9. Custom TCU Limiter Removal:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Remove TCU limiter while still retaining all safeties and OEM Launch Control\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003e\u003cspan\u003e10. KnockCEL:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e For custom tunes (let’s the CEL blink if timing corrections reach a threshold set by the tuner)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan\u003e\u003cstrong\u003e11. MHD MaxCool:\u003c\/strong\u003e Our new Max Cooling feature activates a special cooling mode to reduce oil and coolant temperatures. It will also reduce IAT temps when at standstill. This greatly helps fight heat soak when waiting in staging lines, like on a 1\/4 mile track.\u003cbr\u003e\u003cbr\u003eHow does it work?\u003cbr\u003eWe implemented proprietary logic to activate the fan, set coolant target temps to 72*C, activate the electronically controlled thermostat, and set the water pumps to high cooling mode.\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan\u003eHow can you activate it?\u003cbr\u003eWhile connected to your MHD WIFI adapter, go to “LIVE” tab, click on “MHD+ Live Adjust” and activate max cooling. Max cooling will be active until you turn it off or until the engine is shut off.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan\u003e\u003cstrong\u003e12. MHD Real-Time Tuning:\u003c\/strong\u003e We are  proud to present the world’s first real-time (live) tuning for modern BMWs. During the custom tuning process, it enables editing of all tables (including mapswitch, flexfuel slots, ReFlex Tables) on the fly with the engine running, in real-time without the need to reflash in-between.\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eLicense\u003c\/span\u003e:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eMonitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout with up to 8 fully adjustable gauges. 50+ engine parameters are available at a glance and are logged in the background! Activate the logging mode to save the data to a standard CSV file for later analysis using the built in log viewer. Additionally, we will happily provide free logs analysis.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThese are some of the available monitors: Boost, Boost Target, Lambda (AFR), Intake Air Temp (IAT), Ignition Timing per Cylinder, Coolant Temperature, Oil Temperature, Oil Pressure, Transmission Temperature, High Pressure Fuel Pump (HPFP), Throttle Position, Wastegate Duty-Cycle (WGDC), RPM, Speed, EGT etc.\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003eAdvanced parameters that are not exposed by BMW are available for fine monitoring and tuning (depending on the DME software version if MHD is not flashed) like Timing Corrections per Cylinder, Boost setpoint, Active torque limiter etc.\u003cbr\u003e\u003cbr\u003eFull TCU Logging on S58 cars:\u003cbr\u003eOur new 8HP datalogging allows maximum effort cars to see individual clutch states, clutch solenoid currents (which can then be translated to pressure), torque converter slip %, clutch slip % and much more.  This data is critical for determining if there’s a physical vs. transmission tune related issue occuring and provides powerful insights on how to go even faster. TCU data logging works in parallel with DME logging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll MHD OTS maps:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWe offer a wide selection of OTS maps for the S58 engine suitable for many different vehicle modifications and octane levels. They have been extensively road and dyno tested, just flash and go!\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1 S58 (for stock cars)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e91 OCT \/ 95 RON up to 560HP \/ 700NM (fuel quality limited)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e93 OCT \/ 98-100 RON  up to 650HP \/ 730NM\u003c\/li\u003e\n\u003cli\u003e95 OCT \/ 102 RON up to 660HP \/ 750NM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eE40 Mix up to 700HP \/ 820NM\u003c\/li\u003e\n\u003cli\u003eFull E85 up to 680HP \/ 780NM (fuel system limited)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2 S58 (for cars with Full Bolt Ons)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e91 OCT \/ 95 RON up to 580HP \/ 720NM (fuel quality limited)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e93 OCT \/ 98-100 RON  up to 680HP \/ 760NM\u003c\/li\u003e\n\u003cli\u003e95 OCT \/ 102 RON up to 720HP \/ 800NM\u003c\/li\u003e\n\u003cli\u003eE40 Mix 800HP+ \/ 900NM+\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull E85 up to 680HP \/ 780NM (fuel system limited)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupported Devices:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eApple iOS 10.2 and higher\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAndroid 6 and higher\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupported Adapters \/ Cables (available separately):\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/mhdtuning.com\/pages\/mhd-wireless-adapter\"\u003eMHD WIFI Adapter\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003eMHD Universal only\u003c\/strong\u003e, recommended for iOS \u0026amp; Android)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eENET Cable + Lightning Adapter (iOS only)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupported Cars:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX3M F97 2019 - \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eX4M F98 2019 -\u003c\/li\u003e\n\u003cli\u003eM3 G8x 2021  - \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM4 G8x 2021 - \u003c\/li\u003e\n\u003cli\u003eM2 G87 2022 -\n\u003ch3\u003e\u003cspan style=\"color: #ff2a00;\"\u003e***MHD WIFI ADAPTER IS NOT INCLUDED***\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch5\u003e\u003cspan style=\"color: #ff2a00;\"\u003e*Cars with the newest BMW software require a DME bench unlock in order to unlock OBD flashing regardless of production date.  \u003cbr\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cspan style=\"color: #ff2a00;\"\u003e*Cars Produced after 06\/2020 can only be tuned with a special unlock by FEMTO, due to new tuning protection. This means your DME must be sent to FEMTO in Finland. After your DME was unlocked by FEMTO, MHD will automatically detect the FEMTO unlock.\u003cbr\u003e\u003cbr\u003eFlashing back to stock will always fully remove the unlock and the DME must be unlocked again for flashing MHD.\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cspan style=\"color: #ff2a00;\"\u003eFor off road use only!\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MHD","offers":[{"title":"Yes - Add Wifi Adapter!","offer_id":45724898033862,"sku":null,"price":619.0,"currency_code":"USD","in_stock":true},{"title":"No Thanks","offer_id":45724898066630,"sku":null,"price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0081\/0804\/8420\/files\/product_super-license_2048x_6bad4125-599a-45f0-a7b7-1cc810a6d801.webp?v=1728058796"}],"url":"https:\/\/www.graveyardperformance.com\/collections\/cold-start-10-off.oembed","provider":"Graveyard Performance","version":"1.0","type":"link"}